• Home
  • About Us
  • Services
    • Mold >
      • Mold Inspection
      • Mold Testing
      • Mold Removal
      • What is Black Mold?
      • Preparing for Mold Remediation
      • Mold Damage
      • Is the Mold Really Gone?
      • Areas of Mold Growth
      • Mold Characteristics
      • Moisture Assessment
    • Air Quality >
      • Air Quality Testing
    • Restoration Services >
      • Water Damage Restoration
      • Fire Damage Restoration
      • Mold Damage Restoration
  • Contact Us

Mold REMOVAL KIRKLAND
[Mold removal]

Click to Call Now >

Mold Removal Kirkland WA

Hiring a black mold killer to manage all of your remediation tasks can do you a universe of good. Professionals can give you remediation service that's speedy and effective. If you're able to eliminate any and all hints of the icky substance quickly, then you can minimize the problems that are associated with health troubles and property damage. Our technicians are equipped with remediation tools and supplies that are impressively modern. If you want results that are truly industry-leading, then our seasonal professional service can go a long way for you. It can be tough, even impossible, for some "amateur" removal attempts to fully eliminate the problem. This leaves you and your home susceptible to increased risk and nobody wins. Attempting to do away with mold on your own usually isn't wise. When it comes to mold removal in Kirkland, you shouldn't have to think twice about who to call.

​

Mold Characteristics

  • Mold is always present in your home, business or property – inside and outside.
  • Mold spores can travel through the air and enter your property in a variety of ways such as: through open windows, entryways, HVAC systems, or even on the clothes you wear.
  • The common denominator with mold is moisture. Mold colonies and the subsequent spores must have access to moisture in order to multiply.
  • Prior to mold interventions, areas of excess moisture or condensation must be cleaned up at the source. If not, the mold might come back.
  • The telltale symptom that mold has taken residence in your residence is a palpable musty odor. Often times, following the smell can lead you straight to where it is coming from.
  • Many homes maintain high humidity levels for one reason or another. Even overly-humid living areas can provide a breeding ground for fungal growth. It is best to keep inside humidity to a maximum of 45%.
Instant Quote form for mold removal in Kirkland Washington

    FREE SERVICE ESTIMATE!

Get My Quote >
Mold Overgrowth behind the walls of a Kirkland, Washington Home

In Need of Mold Removal Services?
Call in the Professionals.

(425) 620-2511

See What Professional Mold Removal Can Do For You:

CLICK TO CALL US >
Picture
Picture
Picture
Picture
Picture

How is Mold Remediated?

It doesn't matter where your potential mold growth is located or in what type of property - we can remove it. Our process is in-depth and thorough to make certain we don't miss anything lurking in spaces unseen. Inspections help to identify whether or not there is a problem, testing helps determine what the problem is, and professional mitigation ensures it never comes back again. Throughout the process we do all that is necessary to return your home to pre-damage condition and have it looking and smelling brand new. Efficiency and speed are critical in this industry, and we pride ourselves in bringing the best at both. We aim to be the best mold removal company in all of Kirkland and greater Seattle. Give us a call today for a free estimate and timely inspection of your potential mold problem!
Mold on the interior of a morristown home ceiling. The mold has infested the property and is in need of complete remediation and restoration.
MOLD
​REMOVAL
AND
​REMEDIATION
Image showing the tools necessary to test the indoor air quality of a morristown home. These tools include a spray bottle, air-testing meter, and sample vials.
INDOOR
​AIR
QUALITY
​TESTING
Image showing the tools necessary to test the indoor air quality of a morristown home. These tools include a spray bottle, air-testing meter, and sample vials.
PROTECTION
​AND
CONTAMINATION
CONTAINMENT
FULL-HOME
ODOR
REMOVAL
(DEODORIZATION)

Morristown mold employee performing mold remediation in an attic by vacuuming up the mold spores and removing toxic mold.
CLEANUP
&
​SANITATION
Toxic mold growth on the ceiling of a home in morristown. Using mold testing kits and black mold remediation techniques, the mold is being cleaned up from the property.
HEPA
FILTRATION
​&
​VACUUMING
Toxic mold growth on the ceiling of a home in morristown. Using mold testing kits and black mold remediation techniques, the mold is being cleaned up from the property.

Mold Remediation Steps

  1. Emergency Contact (425) 620-2511: Mold is truly a serious problem and should illicit real concern if found to be in your home. Don’t procrastinate on this one – give us a call and we can sort out whatever the situation may be. We don’t act before we inspect!
  2. Mold Inspection and Damage Assessment: Our in-home inspections allow our certified technicians to see the problem for ourselves. We meticulously examine any area that may be of particular concern regarding moisture or visible growth. Remember, the most dangerous case of mold are often unseen.
  3. Mold Containment: One of, if not the most, important step is to make sure it doesn’t get anywhere else. Unprofessional or untimely containment procedures can lead to preventable mold spreads. Our team utilizes methods of negative pressure and plastic barriers to keep the bad stuff in place. As the cleanup process ensues, spores can move much more rapidly than you would think.
  4. Air Filtration: Closure of the HVAC system immediately upon positive identification seals of the only highway in town for traveling to other locations within your home. Without this step, cross-contamination can end up costing you a fortune and lead to mold infestation everywhere. As the physical spores or mycotoxins become disturbed, air scrubbers help to catch and neutralize the potentially dangerous attackers on the spot. HEPA Vacuums and filters are the number one choice to filter the air.
  5. Actually Removing the Mold: We do an extensive amount of preparation before the first remediation step is ever taken. We know you aren’t interested in a return visit, so we do what is necessary to kick out the fungal intruder and prevent them from ever making it back in. The extent to which we go on mold remediation is highly variable on a number of things. The location, size, species and surrounding environment all dictate how we target our approach. Areas of likely growth harboring include carpet and drywall. In episodes of significant infestation or dense mold growth, the job may require removal of these materials.
  6. Cleaning the Area: When a mold emergency strikes, it is important to clean the unseen. The spores from mold growth have likely taken residence on your furniture, curtains, clothing, rugs and decorations. These items, if not cleaned and sanitized, can be the source for a possible mold problem in the future. The musty odor that is left behind will not be removed until the area is thoroughly cleaned. We utilize some of the industry’s most innovative and safe practices to deodorize your home or business. Unlike the big companies who use foggers that can be a hazard to both humans and the environment, Mold Removal Kirkland deodorizes your home in a way that is safe for everyone!
  7. Restoration and Cleanup: The degree of mold damage and subsequent removal will determine what the restoration step includes. Fixing the drywall or new carpet installation are quick and easy repairs. Larger mold infestations can require full reconstruction of areas that may be much larger. We work with a number of trusted partners in the industry that we can trust to provide assistance in the need of especially large restorations. You will never have to call another company – we have you fully taken care of from inspection to cleanup!

Seriously, Get a FREE Mold Removal Estimate!
​
What do you have to lose?

    FREE SERVICE ESTIMATE!

Get My Quote >
MOLD
> Mold Inspection
> ​Mold Testing
> Mold Removal
> What is Black Mold?
> Preparing for Mold Remediation


MOLD
​> 
Mold Damage
> Moisture Assessment
> Is the Mold Really Gone?
> Areas of Mold Growth
> Mold Characteristics
AIR QUALITY
> Air Quality Testing
RESTORATION
> Water Damage Restoration
> Fire Damage Restoration
​> Mold Damage Restoration
Picture
Mold Removal Kirkland​
12726 NE 120th St. K3
Kirkland, Washington 98034

​(425) 620-2511

moldremovalkirkland@gmail.com
Check Out Our Jersey Mold Partners:
Jersey City
  • Home
  • About Us
  • Services
    • Mold >
      • Mold Inspection
      • Mold Testing
      • Mold Removal
      • What is Black Mold?
      • Preparing for Mold Remediation
      • Mold Damage
      • Is the Mold Really Gone?
      • Areas of Mold Growth
      • Mold Characteristics
      • Moisture Assessment
    • Air Quality >
      • Air Quality Testing
    • Restoration Services >
      • Water Damage Restoration
      • Fire Damage Restoration
      • Mold Damage Restoration
  • Contact Us
​